In the actual production, PURROS Machinery has collected mass customers’ problems about grinding drill bits by hand (manual grinding drill bits), now, list the summary of the problems and how to solve as bellow for your reference and study. In the actual production, PURROS Machinery has collected mass customers’ problems about grinding drill bits by hand (manual grinding drill bits), now, list the summary of the problems and how to solve as bellow for your reference and study.
Tag Archives: drill bit grinding machines
The Check of Standard Twist Drill Bit after Grinding
Step 1: Checking the point angle (cutting lip angle) of standard twist drill bit is correct or not, and whether it is symmetric with the axis of the standard twist drill bit? (The correct point angle of standard twist drill bit is ±118°, if it be used to drill harder materials that the point angle can be extended to 120°; if there are the softer materials, the point angle should smaller than before, but keep mind, do not smaller than 90°.)
Step 2: To check the length and height of two major cutting lip (major cutting edge) are consistent. Because the quality of the machined holes are affected by whether the length is the same.
The check method for step 1 and step 2 is that: Place the cutting part of twist drill bit keeps in a vertical position, keep eyesight at the horizontal level, and then repeatedly rotate 180°, where is the center axis of standard twist drill bit, to observe whether the length of two major cutting lips are same in rotation. It is an assumption that to observe the length of two major cutting lips at the center of axis; If the lengths of two major cutting lips are different, that the shorter side should be grinded.Continue reading
