How to select the grinding wheel before sharpening the lathe tools？

How to select the grinding wheel?

How to select the grinding wheel before sharpening the lathe tools？

Grinding wheel

Rough grinding lathe tool should be selected the grinding wheel with smaller abrasive grains, on the contrary, fine grinding lathe tool should be selected the grinding wheel with bigger abrasive grains. When sharpening lathe tool of HHS, it should be used the granularity between 46 and 60, or soft aluminum oxide grinding wheel. When sharpening carbide-tipped lathe tool, it should be used the granularity between 60 and 80, or soft Sic grinding wheel. Tips: Do not confuse the two different grinding wheels.

Drill grinding attachment mounting and use instructions

With the drill grinding attachment of PURROS brand for drill bit grinder PG-13D you can now sharpen drill bits with high precision. The optimal point and clearance angles can be set according to each drilling requirement, which depends upon the drill size and material being drilled. You can completely restore worn drills as well as broken drills back to new. When sharpening broken drills, much time may be saved by roughly shaping drills free hand before using drill grinding attachment. Dip drill in water when shaping free hand to prevent overheating.

Continue reading→

NC problems of tool and cutter grinding machine collect

CNC (Computer Numerical Control) is widely used in industrial production, which young workers have been able to make the high precision industrial products instead of manual operation. As the new tools and cutters for increasing use, oppositely PCD cutting tools relies too much on artisan’s skills yet. With the increase of human cost and the change of people’s lifestyle, worker with such skills are becoming increasingly difficult to find. The human cost of enterprises is higher and higher, the automatic machineries are adopted will be the trend.

PURROS NC problems of tool and cutter grinding machine collect

PURROS Machinery will adopt the digital design to grind cutting tools.

Continue reading→

Solutions Summary of Common Drilling Problems (Relationship with the Good or Bad Grinding Drill Bit)

In the actual production, PURROS Machinery has collected mass customers’ problems about grinding drill bits by hand (manual grinding drill bits), now, list the summary of the problems and how to solve as bellow for your reference and study. In the actual production, PURROS Machinery has collected mass customers’ problems about grinding drill bits by hand (manual grinding drill bits), now, list the summary of the problems and how to solve as bellow for your reference and study.

Continue reading→

The Check of Standard Twist Drill Bit after Grinding

Step 1: Checking the point angle (cutting lip angle) of standard twist drill bit is correct or not, and whether it is symmetric with the axis of the standard twist drill bit? (The correct point angle of standard twist drill bit is ±118°, if it be used to drill harder materials that the point angle can be extended to 120°;  if there are the softer materials, the point angle should smaller than before, but keep mind, do not smaller than 90°.)

Step 2: To check the length and height of two major cutting lip (major cutting edge) are consistent. Because the quality of the machined holes are affected by whether the length is the same.
The check method for step 1 and step 2 is that: Place the cutting part of twist drill bit keeps in a vertical position, keep eyesight at the horizontal level, and then repeatedly rotate 180°, where is the center axis of standard twist drill bit, to observe whether the length of two major cutting lips are same in rotation. It is an assumption that to observe the length of two major cutting lips at the center of axis; If the lengths of two major cutting lips are different, that the shorter side should be grinded.Continue reading→

Do you know how many different kinds of drill bits? (Classification by Construction and Shank types)

Drill bits are the special rotating tools that have cutting capacity at the top. Generally, drill bits are made from carbon steel (SK), HHS (SKH2, SKH3), etc, and then by milling machining or quenching after rolling, the final step is the grinding after tempering heat treatment. Drill bits are used for machining metals or other materials. Drill bits have a wide useful, such as drilling machine, lathe machine, milling machine and power drill, etc.

Classification of Drill Bits by Construction and Shank types

Classification of Drill Bits

Continue reading→

Operations Guide of Drill Bit Grinding

First: Preparation Before Grinding

A: Assembly of Drill Bit and Fixture

Assembly of Drill Bit and Fixture

  1. Checking the diameter of drill bit shank, then select the suitable collet chuck and cutting sets.
  2. Insert the collet chuck into the fixture and lock the nut.
  3. Put the drill bit into the collet chuck, and keep 35~50mm out of the collet chuck.
  4. Adjust the scale to suit the outer diameter of the drill bit, and adjust the angle of point angle.
    Attention: Keep some margin for adjusting before locking the chuck sets.

Continue reading→

Cutting performances and Advantages of Ni Zhifu Ordinary Twist Drill Bit

Definition of Ni Zhifu Ordinary Twist Drill Bit: Based on standard twist drill that the cutting part is grinded onto a special shaped drill bit. The standard twist drill consist of two major cutting lips (major cutting edges) and a chisel edge. The most fatal weakness is that the negative front angle of chisel edge and dead center are larger, led to the cutting conditions are unfavorable. Ni Zhifu Ordinary Twist Drill Bit is that grinding two symmetrical crescent grooves based on standard twist drill, forming arc blade, and then sharpening two inner straight edges on the chisel edge and dead center. After that, with the chisel edge and original two straight edges, making the standard twist drill into “Three knife-points and seven knife-edges” that is the Ni Zhifu Ordinary Twist Drill Bit.Continue reading→